Many homeowners chose laminate flooring for their homes because it is much cheaper than hardwood or engineered flooring and it is easy to install due to the fact that no glue or nails are necessary in the installation process. The laminated planks snap quickly together and in no time you will have a solid floor installed over a water-resistant underlayment. But if the laminate flooring Atlanta Company you hired for the job doesn’t install it properly, then the flooring can buckle.

Any contractor from a laminate flooring Atlanta business will tell you that laminate planks contract and expand according to humidity and temperature in the room and if you don’t give it enough space to do these things then the flooring will buckle. Nevertheless, buckling laminate flooring is not that difficult to fix once you learn how to do it.

If you’re curious about the reasons for which laminate floors buckle then you can ask a professional worker from a laminate flooring Atlanta service and he will tell you that if you over mop or if you have leaks in your house then the water and moisture can damage the laminate planks. Another reason would be the lack of acclimatization of the laminate boards before installation or the lack of expansion gap. Laminate can buckle if the floor was installed while the room temperature was too low or too high. If you don’t previously use a vapor barrier then you will have moisture damage that will cause laminate floors to buckle. Usually laminate floors buckle near the walls where the laminate planks have expanded to maximum and they have no more room to expand freely.

Before you start repairing your laminate flooring you should know not to walk on your buckled floor because it will permanently damage the locking system of the planks. If the damage to the flooring is not extensive then you’re in luck and you won’t have to replace all the laminate boards in your room. All you’ll have to do is replace the buckled planks and your laminate flooring will be as good as new.

The first step is to use your screwdriver and hammer to carefully remove molding around the flooring. All the pieces you remove will need to be put back in place after you’ve repaired the floor. Afterwards, you must remove the spacers and install smaller ones in order to give more room to the laminate boards to expand. Spacers are mandatory and are placed between the wall and the closest floor plank. The next step is to push down on the buckle area or peak. If the buckles still won’t go away with pressure then use even smaller spacers until there are no more peaks. If the buckled area is not completely eliminated then you can reinstall the molding around the edges by hammering it back into place.

Scratches on laminate planks can be easily covered up with a flooring repair kit, but it is essential that the color of your repair kit matches the color of the flooring. In order to make sure you buy the right color a good idea would be to take a laminate plank with you before you go to the store. If the scratches are too extensive then you can simply replace the damaged planks in the same manner you replaced the buckled ones.

For more info please: Visit Here